Products
Purchase a Flo-Matic Air Drum Pump
Need help choosing the right pump for you?
Find the right Flo-Matic pump for your needs
Oils
Pneumatic Drum Pumps – FM-1-K and FM-1-G
Use: Hydraulic oil, motor oil, waste oil
Characteristics:
- Body: Powder coated aluminum
- Wetted Parts: aluminum, die cast zinc, buna-N (FM-1-K), nylon
Specifications and Advantages:
- Designed for the transfer of a variety of liquids with a wide viscosity range
- Powder coated pumps have good resistance to solvents, fuels, oils, etc
- Self-priming from dry
- Flow rate set by adjusting pressure with built in regulator
- In case of dry running, the pump continues to run without any adverse effect to the pump
- If the delivery of liquid is blocked the pump stops automatically without damage
| Max Pressure | Max Flow | Ø Orifice | |
| FM-1-K | 6 psi | 18 GPM | ¾” |
| FM-1-G | 6 psi | 18 GPM | ¾” |
Solvents
Pneumatic Drum Pumps – FM-1-G
Use: Lacquer thinner, MEK, xylene
Characteristics:
- Body: Powder coated aluminum
- Wetted Parts: aluminum, die cast zinc, nylon
Specifications and Advantages:
- Designed for the transfer of a variety of liquids with a wide viscosity range
- Powder coated pumps have good resistance to solvents, fuels, oils, etc
- Self-priming from dry
- Flow rate set by adjusting pressure with built in regulator
- In case of dry running, the pump continues to run without any adverse effect to the pump
- If the delivery of liquid is blocked the pump stops automatically without damage
| Max Pressure | Max Flow | Ø Orifice | |
| FM-1-G | 6 psi | 18 GPM | ¾” |
Fuels
Pneumatic Drum Pumps – FM-1-K and FM-1-G
Use: Diesel fuel, kerosene, gasoline
Characteristics:
- Body: Powder coated aluminum
- Wetted Parts: aluminum, die cast zinc, buna-N (FM-1-K), nylon
Specifications and Advantages:
- Designed for the transfer of a variety of liquids with a wide viscosity range
- Powder coated pumps have good resistance to solvents, fuels, oils, etc
- Self-priming from dry
- Flow rate set by adjusting pressure with built in regulator
- In case of dry running, the pump continues to run without any adverse effect to the pump
- If the delivery of liquid is blocked the pump stops automatically without damage
| Max Pressure | Max Flow | Ø Orifice | |
| FM-1-K | 6 psi | 18 GPM | ¾” |
| FM-1-G | 6 psi | 18 GPM | ¾” |
Detergents
Pneumatic Drum Pumps – FM-1-K and FM-1-G
Use: Liquid soaps, waxes, cleaners
Characteristics:
- Body: Powder coated aluminum
- Wetted Parts: aluminum, die cast zinc, buna-N (FM-1-K), nylon
Specifications and Advantages:
- Designed for the transfer of a variety of liquids with a wide viscosity range
- Powder coated pumps have good resistance to solvents, fuels, oils, etc
- Self-priming from dry
- Flow rate set by adjusting pressure with built in regulator
- In case of dry running, the pump continues to run without any adverse effect to the pump
- If the delivery of liquid is blocked the pump stops automatically without damage
| Max Pressure | Max Flow | Ø Orifice | |
| FM-1-K | 6 psi | 18 GPM | ¾” |
| FM-1-G | 6 psi | 18 GPM | ¾” |
Light Acids
Pneumatic Drum Pumps – FM-1-G
Use: Phosphoric acid <40%, phosphoric acid >40%
Characteristics:
- Body: Powder coated aluminum
- Wetted Parts: aluminum, die cast zinc, nylon
Specifications and Advantages:
- Designed for the transfer of a variety of liquids with a wide viscosity range
- Powder coated pumps have good resistance to solvents, fuels, oils, etc
- Self-priming from dry
- Flow rate set by adjusting pressure with built in regulator
- In case of dry running, the pump continues to run without any adverse effect to the pump
- If the delivery of liquid is blocked the pump stops automatically without damage
| Max Pressure | Max Flow | Ø Orifice | |
| FM-1-G | 6 psi | 18 GPM | ¾” |